

![]() |
DRUID BLACK DISCENDER
€127.00 |
Everything you need to install a certified movable anchor point.
It will allow you to install acrobatic and aerial dance equipment in a matter of seconds, safely and without the need for ladders and scaffolding.
This kit is designed to be installed into concrete structures (walls and ceiling).
KIT CONTENTS:
NO. 3 ANCHOR PLATES WITH ANCHOR BOLTS
NO. 2 PULLEYS
NO. 2 OVAL STEEL CARABINERS WITH RING NUT CLOSURE
No. 2 OVAL QUICK LINKS MEASURE 8 mm
No. 1 BALLAST BAG TO BE FILLED WITH 2/3 kg OF SAND OR GRAVEL
No. 1 SEMI-STATIC ROPE D. 10.5 mm WITH CERTIFIED SEWN LOOP
The length of the rope must be specified at the time of purchase. To determine the correct length of the rope, it is good practice to multiply the height of the anchor point from the ground by 2 and add its distance from the wall to which the ground plate is attached: A x 2 + B (See illustration)
DOWNLOAD
Certification and instruction manual ANCHOR PLATE IT - ENG - DE - FR - ES
We would like to remind that many of the dynamic figures that can be performed on aerial acrobatic props can develop a traction load up to 10 times the athlete's body weight. Creating a safe and reliable anchor point is not only essential for your safety, but allows you to practice your favorite disciplines without worries and therefore in a totally rewarding and productive way.
IMPORTANT NOTICE
ANCHOR PLATE BLL and WLL:
BLL 30 kN = approx. 3000 kg
WLL 40 daN = approx. 400 kg
Factor of safety 7
IF YOU INSTALL THE PLATE USING THE SCREWS FOR WOOD BEAMS THE FOLLOWING ARE THE VALUES RELATIVE TO THE BLL and WLL of the 3 SCREWS CORRECTLY INSTALLED INTO WOOD BEAMS:
BLL 15 kN = approx. 1500 kg
WLL 20 daN = approx. 200 kg
Factor of safety 7
IF YOU INSTALL THE PLATE USING THE TASSELS FOR CONCRETE THE FOLLOWING ARE THE VALUES RELATIVE TO THE BLL and WLL of the 3 TASSELS CORRECTLY INSTALLED INTO CONCRETE:
BLL 18 kN = approx. 1800 kg
WLL 25 daN = approx. 250 kg
Factor of safety 7
WARNING!
The workload of a system and its breaking strength are determined by the weakest link in the chain. This means that with reference to the ANCHOR PLATE you should always refer to the WLL and BLL of the FASTENERS used for the installation.